News

Hi everyone I’m glad to be a part of the group and see what everyone is up to with there canam atv’s. Attachment 84594[IMG]https://uploads.tapatalk-cdn.com/20181124/a049f57343a664b6fa48db27d8abe08a.jpg[/IM


Sent from my iPhone using Tapatalk

Attached Images

File Type: jpg

IMG_1843.jpg (727.6 KB)

Hi All,
I am wondering if someone can help me out I have a 2009 sportsman 850xp been going great till the other day when I went to start it and just got click click click ok so I thought its a flat battery but the battery is ok so I took starter motor out and bench tested and that seems to be in good order to, But when its connected back onto bike its click click click again but if not earthed to the bike sometimes it will work but as soon as its earthed onto motor again its click click again, Hope someone has some idea of what might be going on.

Cheers Leeroy.

Thinking about putting either the mid-height or tall on my machine. I have Polaris mirrors, and winch handlebar controls. Am I going to have problems? Do they all fit together? Is the windshield a quality unit?

Hi, I have a 2011 can am renegade 800r, i was riding it the other day and noticed it said on the dash "limp home mode" I also had no rear brake while it said that. I ended up shutting it off and letting it sit for a moment, and the limp mode and check engine light went away, and shortly after my rear brake started working again. Its got me very confused and I would like to figure it out, I really don't want this to be a problem for future rides.

Hi, I have a 2011 can am renegade 800r, i was riding it the other day and noticed it said on the dash "limp home mode" I also had no rear brake while it said that. I ended up shutting it off and letting it sit for a moment, and the limp mode and check engine light went away, and shortly after my rear brake started working again. Its got me very confused and I would like to figure it out, I really don't want this to be a problem for future rides.

I just picked up my machine today, the dealer installed a new trunk and installed the heat dissipation kit because of the plastic melting issue, I take it out of my truck and notice the tail light out, I look closely and it looks like the housing is starting to melt, I pulled the bulb and thought the housing was going to break but it didn't, the light housing had started to melt and the grey connector the bulb goes in has started to melt. Wtf

I checked the other side, while not as bad does show signs of melting.

Not feeling real warm and fuzzy about this machine so far

my 650.

Hi, new to the forum and live down in New Zealand. I have acquired a 2007 Outlander 400 HO into my stable of bikes. Having some issues. when I got the bike the gear selection was and still is in reverse. Park is park and neutral is neutral, however in R it goes forward and L and H are 2 speeds in reverse.

Secondly, the 2 and 4WD aren't working, so I removed the motor, pushed the locating shaft in towards the motor to lock it into 4WD permanently, thinking this would be fine for the bush and hunting. when I started the bike again, my front wheels are going backwards and the rears forwards, so just a total no go and very bemused. I have a very good mechanical knowledge of bikes but this one has stumped me. any help would be very much appreciated.

So as the title says im having troubles with my winch. My buddy got stuck in a pretty deep hole and his winch got burned up trying to pull him out so I hooked up to him along with another guy with a winch and we got him out but as we got him out my winch just seemed like it gave up. It was no longer working at all it wont go in or out but it clicks at the relay so im thinking that the relay went out but at the same time im kinda thinking it burned out because why would the relay just go out like that? Oh and its the stock winch that comes on the outlanders.

Hey I have an outlander 650 XT 2017 and was thinking of getting one as a new belt for the outlander as I have been rough on the current one and hear a lot of squealing from it at all speeds and loss of top speed and torque.

Anyone have any experience with the dayco XTX belts?


Sent from my iPhone using Tapatalk