Posted on

Polaris scrambler 04 will not wheelie

I have a 04 scrambler. 4x4 and RWD. it has a winch in the front. Ive tried all types of ways to wheelie it and nothing works. Can i wheelie a scrambler or what the heck. Ive put my left foot on the rear rack, ive pushed my body back. Ive pressed the brake while revving it. Any tips?
Posted on

Regrease?

I just puchase a new 2016 scrambler 1000. Yes its a new left over. After my second ride i noticed the grease running out of the rear a arms by the rear end housing(see picture). The housing was warm but not hot after a 100 mile ride. Should i regrease it now with high temp grease?

Sent from my SM-G950U using Tapatalk
Posted on

Brake error message power decrease Help!!

I have message that pops up on my display that says brake. I lose power at about 4500 RPMs, or 26-20 mph. I have read in places that it could be a break light. Both light stay on when the machine is in the on position. I had this problem once last year. I took it to the shop and they fixed the problem. That being said I forgot what they told me the problem was... Any help would he muchly appreciated

2016 Outlander
Posted on

speedometer

i have a 2016 570 ,i need to replace the speedometer. it has a needle to show the kph.but the rest of the info is on the little display at the bottom.if i get a used one ,will it show my atv's mileage. or the one in came off of.
Posted on

02 sportsman 400 won’t start with electric ignition

So I just purchased a used 2002 sportsman 400 that only starts with pull start. The starter would engage when I used a screw driver to jump the solenoid terminals. The speedometer did not work when I bought it but the neutral light lit up. But I took the Speedometer unit off to paint it and when I plug it back in the neutral light doesn’t work any more either. I bought a new battery and a new solenoid and installed them but when I turned the key I still got nothing but again when I jumped the terminals on the new solenoid the starter engauged again. So now I’m left wondering if I don’t even need the bed solenoid and my problem is something else. I’m assuming something along the lines of the solenoid isn’t being told to work when I turn the key. There is a lot of wires that look like they used to be hooked up but I got no idea what they were for or where they went.