News

I got a new engine and I’m ready to put it in. But it seems I have run into problems. I believe the gear in the middle should not be there and I’m at a loss.

Attached Thumbnails

 

I am in the process of rebuilding a 1995 Magnum 2x4. I installed a new stator and have it running well.

Curious if anyone has any pictures of how the wiring for the stator is ran from the engine to the front. Mainly, I am curious as to how the stator wiring runs in the front of the machine -- does it run through some of the holes in the front "A" section by the steering shaft or does it run underneath this area.

Also, besides carb vent tubes, oil tank vent (going to airbox) gearcase vent tube and the gas tank vent tube in the steering column, are there any other vent tubes?

The CVT vent tube goes to a hole in the frame, correct?

Thanks!

2018: Should I get a 850 xt + buy elka shocks, or just get the xtp with the fox?

1900$ price diff. elkas are 1500. 400 left (pays for beadlocks, gauges, etc...) buying separate wheels would cost me 6-700$ so if I want good shocks and beadlocks, better with the xtp I guess?

So what should I get?

(regarding the 850 vs 1000, imo, 850 is plenty of power and I don't really see why I would need a 1000.... at that point IMO it's just better if I get skids +windshield instead....) opinion?
I mostly do slow trail anyway...

Hi. I have a polaris trail boss 330 from 2003. Bought it used half a year ago. Running great. Had some issues the last weeks, where i started to smell like hot electronics or plastic.noticed the plastic covers on the side had touched the exhaust an melted a bit. But it continued. One day i noticed some smoke coming from the front. Just a little. I then pulled of the front plastic cover and saw, that what I believe is the ECM was smoking from "inside" and the plastic in there was melted along with the connectors being fried. It stopped when I stopped the machine from running. Have then seen the same issue again.

I noticed a recall on the ECMs from that period and I have writen Polaris here in Denmark to find out if my bike is covered.

What else could be the cause of this? Is there something I should check?
Engine hot light doesn't work and I have never heard the oil cooler fan running. Read some where that this could be related to faulty ECM as well. Also some two times I have experienced that I could start the bike and ride it for 30 mins and stop and then I could not start again, because there was not enough power to turn the motor round. Charging for 15mins made it start. Don't know if this gives any clues.

Thanks in advance.
Kim

Attached Thumbnails

   

Just curious if anyone had a 2004 outlander 400 repair manuel they would be willing to share? Saw some older download links but they are all dead now.

Nick

Whats the highest suggested wattage/amp draw for lighting - assuming of course everything is relayed?

Just found a dealer of this tires in my area, $86 per tire.... Tires are another Chinese copy of the Big Horns (Even when the big horns are Chinese as well)

They have the exact OEM size of the Sportsman Touring SP (Most F$cking hard to find tire in the d%mn world)

The brand is Forerunner model ATLAS



26x8-14 (front)
26x10-14 (rear)

Has anyone had the opportunity to try this tires?

Ill take the Best offer

Attached Thumbnails